NETGEAR WGT624 v3 Reference Manual page 67

Table 6-1. Menu 3.2 - Wireless Router Status Fields (continued)
Field
DHCP
IP Subnet Mask
Domain Name Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Maintenance
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Description
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
Displays the address of the current Domain Name Server
These parameters apply to the Local (WAN) port of the router.
This field displays the Media Access Control address being used by the
LAN port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.1.1.
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
These parameters apply to the Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is NETGEAR.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies if the channel the wireless port is using. See
Communications" in Appendix B
frequencies used on each channel.
Indicates the current mode (g & b, g only, b only, or Auto 108 Mbps)
Indicates if the Access Point feature of the router is enabled. If not
enabled, wireless devices will not be able to connect to the network.
Indicates if the wireless router is broadcasting its SSID.
v3.0, December 2005
"Wireless
for a link to a document that details the
6-3