How To Configure Wep - NETGEAR WGT624 v3 Reference Manual

This field determines which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems with another nearby
wireless router or access point. Select a channel that is not being used by any other wireless
networks within several hundred feet of your wireless router. For a link to more information
on the wireless channel frequencies, see
6. For initial configuration and test, leave or set "Security Options" to Disable.
7. Click Apply to save your changes.
Warning: If you are configuring the router from a wireless computer and you
8. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the wireless router.
Once your computers have basic wireless connectivity to the wireless router, then you can
configure the advanced wireless security functions of the wireless router.

How to Configure WEP

To configure WEP data encryption, follow these steps:
1. Log in to the WGT624 v3 wireless router at its default LAN address of
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the Setup section of the main menu.
3. From the Security Options section, select WEP (Wired Equivalent Privacy). The WEP
options display.
Wireless Configuration
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
"Wireless Communications" in Appendix
change the router's SSID, channel, or security settings, you will lose your
wireless connection when you click Apply. You must then change the
wireless settings of your computer to match the firewall's new settings.
For this reason, it is best to use a wired connection between the computer
and the router while changing the basic setup or security settings.
v3.0, December 2005
B.
http://192.168.1.1 with
5-11