NETGEAR WGT624 v3 Reference Manual page 64

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
5. Click Add to add a wireless device to the wireless access control list. The Available Wireless
Cards list displays.
Figure 5-9
6. In the Available Wireless Cards list, either select from the list of cards the WGT624 v3 has
found in your area, or enter the MAC address and device name for a device you plan to use.
You can usually find the MAC address printed on the wireless adapter.
Note: You can copy and paste the MAC addresses from the wireless router's
Attached Devices menu into the MAC Address box of this menu. To do this,
configure each wireless computer to obtain a wireless link to the wireless
router. The computer should then appear in the Attached Devices menu.
7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen. Repeat these steps for each additional device you wish to add to the list.
8. Repeat steps 5-7 for each additional device you wish to add to the list.
9. Be sure to click Apply to save your wireless card access list settings.
Now, only devices on this list will be allowed to wirelessly connect to the WGT624 v3.
5-16
v3.0, December 2005
Wireless Configuration