Installing And Removing A Board; Installing A Board - Fujitsu PRIMERGY ECONEL 30 Operating Manual

System expansions

Installing and removing a board

CAUTION!
!
Please take note of the "Information about boards".
The number, position and arrangement of the board slots on the system board can be found in the
technical manual for the system board. Boards may already be installed when the device is shipped.

Installing a board

Ê
Open the casing (see "Opening the casing").
1
Ê
Press the unlocking mechanism (1) down and open the locking rail (2). The word "PRESS" is
embossed on the unlocking mechanism.
Ê
Remove the slot cover from the slot (3).
CAUTION!
!
Do not dispose of the slot cover. For cooling, protection against fire and in order to comply
with EMC regulations, you must refit the slot cover if you remove the board.
Ê
Take the new board out of its packaging.
Ê
Make the required settings for the board.
38
2
3
Installing and removing a board
A26361-K831-Z102-1-7619