Set The Time And Date (Clock); 12. Select A Channel And Adjust The Volume - GE TV User Manual

Startup

11. Set the Time and Date (Clock)

12. Select a channel and adjust the volume

To set the clock:
A. Press MENU on the remote to display the TV/VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display the SET TIME and DATE screen.
D. Use the number buttons on the remote to enter the time.
• Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM, press 0, then 1, then 0, then 7, then 2.
E. Use the number buttons on the remote to enter the date.
• The day of the week will automatically appear after you enter
the year.
• Press CLEAR on the remote at any time to change incorrect
entries.
F. Press MENU on the remote to start the clock.
G. To exit and return to TV viewing, follow the on-screen instructions.
H. To display the time and date, press DISPLAY on the remote.
A. Press CHANNEL up or down or press the number buttons on the
remote to select a channel.
Example: For channel 2, press 0 then 2. The channel number
is displayed on the screen.
• For cable channels over 99, press and hold 1 until 1– – appears.
Then enter the next two numbers. Example: For channel 102,
press and hold 1. When 1 - - appears, press 0, then press 2.
B. Press VOL up or down to adjust the volume. The volume display
appears on the screen.
Setting Up the TV/VCR
TV/VCR MAIN MENU
1 Screen
2 Time
TIME
1 Set Time and Date
SET TIME AND DATE
Time --:-- - -
(hh:mm)
Date --/--/--
Press MENU to cancel
SET TIME AND DATE
Time 01:07 PM
Date 10/31/98 Saturday
Press CLEAR to correct
Press MENU to set
Ch 02
Volume-...............+
5