Zero Search; Blank Search - GE TV User Manual

Using the Playback Features

Zero Search

This feature allows you to quickly return to a time counter reading
of 0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
1. Insert the pre-recorded tape and press STOP.
2. Press DISPLAY twice to display only the time counter.
3. Use PLAY, FF, or REW to locate the start of the segment you
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the
6. Press SEARCH twice to display the ZERO SEARCH screen. The
7. Press REW or FF to return to 0:00:00.

Blank Search

The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH three times to display the BLANK SEARCH
3. Press FF to begin searching for a segment that is at least six
4. Press STOP to stop BLANK SEARCH.
want to repeat.
end of the segment you want to repeat.
current time counter is displayed.
The tape rewinds or fast forwards to the 0:00:00 and begins
playing.
screen.
BLANK SEARCH
Press FF to begin searching
for blank section of tape.
Press SEARCH to exit
seconds of blank tape.
Playing a Tape
ZERO SEARCH
Current tape counter is
0:12:34
Press REW to go to
0:00:00
Press SEARCH to exit
— OR —
ZERO SEARCH
Current tape counter is
-0:12:34
Press FF to go to
0:00:00
Press SEARCH to exit
21