Copying And Editing Tapes - GE TV User Manual

Copying and Editing Tapes

Operating Instructions
1.
Caution: The unauthorized
2.
recording of television pro-
grams and other materials
may infringe upon the rights
of others.
3.
(Refer to hookup on page 30.)
Use another VCR or camcorder as the playback VCR and
the TV/VCR as the recording VCR.
Turn on the VCR or camcorder and the TV/VCR.
To record from the AUDIO/VIDEO IN jacks, press INPUT
to select the rear AUDIO/VIDEO IN jacks instead of a
channel. Press INPUT again to select the front
AUDIO/VIDEO IN jacks.
Insert the tape you want to copy into the playback VCR
or camcorder. Insert a blank tape with safety tab intact
into the TV/VCR.
4. Start the playback VCR or camcorder playing. If the
tape was not recorded on the playback VCR, streaks
may appear and you may need to adjust the tracking.
When you reach the place you want to begin copying,
place the playback VCR or camcorder in play pause.
5. Press REC, then PAUSE, on the TV/VCR's remote.
6. Press PAUSE on both the VCR or camcorder and the
TV/VCR's remote at the same time to begin copying
the tape.
7. Edit out segments that you do not want to copy by
pressing PAUSE on the TV/VCR's remote to pause the
tape. Then, locate the next segment you want to copy on
the playback VCR or camcorder by using FF, REW, or
PLAY. Press PAUSE on the playback VCR or camcorder.
Press PAUSE at the same time on both the VCR or
camcorder and the TV/VCR's remote to resume
copying.
8. Press STOP on both the VCR or camcorder and the
TV/VCR's remote when you are finished.
Recording a Program
VIDEO1
27