Express Recording - GE TV User Manual

Recording a Program

Express Recording

Express recording lets you record up to four hours or to the end of the tape without programming
the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end
of the recording.
How to Use Express Recording
1. Insert a tape with safety tab in place.
2. Select the channel to be recorded.
3. Press SPEED to select a recording speed.
4. Press REC twice to activate express recording.
5. Press REC repeatedly until the desired amount of
The TIMER REC indicator on the TV/VCR's front panel
will light during express recording.
During express recording, press REC to display the time
remaining on the screen. Press REC again to increase the
recording time.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on
the remote to stop the express recording.
Repeatedly press REC until RECORD LENGTH: 0:00
appears. The recording stops after a few seconds.
24
The TV/VCR will turn on.
To record from the AUDIO/VIDEO IN jacks, press
INPUT to select the rear AUDIO/VIDEO IN jacks instead
of a channel. Press INPUT again to select the front
AUDIO/VIDEO IN jacks.
You can also change the speed of the recording while
the recording is in progress.
recording time is displayed.
Each time you press REC, the recording time increases
as shown below:
RECORD LENGTH 0:00
Ch 04
Press REC to set length
Display
— OR —
Press Recording
REC Time
(
0:30 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00:00 (Normal Record)
0:00 (Turns Off)