Ntc Sensor; Rear Air Duct Cover (Hot Air Circulation); Rear Air Duct Cover (Cold Air Circulation) - Electrolux TC2 Service Manual

12.4.2 NTC Sensor

Remove the sensor from the seal
Detach the connector

12.4.3 Rear air duct cover (hot air circulation)

Remove the motor wiring from the anchor securing the
wiring to the duct cover.
Remove the three screws which secure it to the base and
remove.

12.4.4 Rear air duct cover (cold air circulation)

Remove the screw and detach the duct cover from the
three anchor tabs (two upper lateral tabs, one lower tab)
which secure it to the base, and remove.
SOI/ADL 48/57 599 38 46-21