Step 4: Connecting The Audio Cords - Sony SVR-HD700 Operating Instructions Manual

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver). This will enable you to listen to sound.
When you connect to the TV using an HDMI cord and want to output only from the TV, the following
connection is not necessary.
A Connecting to audio L/R input jacks
This connection will use your TV's or stereo amplifier's (receiver's) two speakers for sound.
B Connecting to a digital audio input jack
If your AV amplifier (receiver) has a Dolby
You can enjoy Dolby Digital (5.1ch) surround effects.
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
HDD recorder
Coaxial digital cord (not supplied)
[Speakers]
B
Rear (L)
Front (L)
Centre
: Signal flow
*1
Manufactured under license from Dolby Laboratories.
"Dolby," and the double-D symbol are trademarks of Dolby Laboratories.
*2
The yellow plug is used for video signals (page 11).
*1
Digital decoder and a digital input jack, use this connection.
2
(yellow)*
Audio/video cord
(supplied)
(white)
(red)
~
AC IN
to DIGITAL AUDIO OUT (COAXIAL or OPTICAL)
or
AV amplifier (receiver)
with a decoder
(yellow)
(white)
(red)
to AUDIO OUT (L/R) 1 or 2
RF THROUGH AERIAL IN VIDEO OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT
PCM / DOLBY DIGITAL
Y
IN
COAXIAL
VIDEO
L
P /
B
C
B
R
P R /
C
R
OUT
OPTICAL
S VIDEO
HDMI
AERIAL OUT OUT
COAXIAL
OPTICAL
Optical digital cord
(not supplied)
to coaxial or optical input
[Speakers]
Rear (R)
Front (R)
Subwoofer
L L
R R
1 2
AUDIO OUT
L
R
1 2
AUDIO OUT FOR SERVICE USE
DIGITAL AUDIO OUT
PCM / DOLBY DIGITAL
13
,continued