Step 2: Charging The Battery Pack - Sony Handycam DCR-SR45 Operating Manual

Step 2: Charging the battery pack
•
13
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
3
For DCR-SR55E/SR65E/SR75EI
SR85E:
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
For DCR-SR35E/SR36E/SR45EI
SR46E:
Connect the AC Adaptor to the DC
IN jack on your camcorder.
4
For DCR-SR55E/SR65E/SR75EI
SR85E:
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket). Insert
the camcorder into the Handycam
Station securely, all the way to the
bottom.
2
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
1
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 91) after
attaching it to your camcorder.
U
Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
POWER
switch
~~~~r-
DCINjack
AC Adaptor
-~~
4
AC Adaptor
-~~
Battery pack
DC INjack
To the wall outlet
(wall socket)
DCR-SR3SE/SR36E/SR4SE/SR46E:
DC plug
With the A mark
on the right
DCR-SRSSE/SR6SE/SR7SE/SR8SE: