Playing the image on aTV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable
[I]
or an A/V connecting cable with S VIDEO
[1].
Connect your camcorder to the wall
outlet (wall socket) using the supplied AC Adaptor for this operation (p. 13). Refer also to the
instruction manuals supplied with the devices to be connected.
DCR-SR35 E/SR36E/SR45 E/SR46E:
r
I
Device without
Device with an
an 5 VIDEO jack
5 VIDEO jack
IN
IN
SVIDEO
~
0
-
VIDEO
VIDEO
-:>e
e
(Yellow)
(White)
~~]
~
~
I
(White)
-:UDIO]
AUDIO
.
=-.
$
(Red)
== •
(Red)
(Yellow)
~
'\":~)~?i>
• . .
~
VCRs orTVs
.-
lit
.
~
-
AN Remote Connector
or AN OUT jack
LC.C_~
:
Signal flow
~
~
;
ii
ANR
ANOUl.
. .
~
m7[
~
:<BJ>-
DCR-SR55E/SR65E/SR75E/
SR85E:
34
[I]
AN connecting cable (supplied)
The Handycam Station has an A/V
OUT jack (DCR-SR55E/SR65E/SR75E/
SR85E) (p. 99) and the camcorder has
an A/V Remote Connector (p. 96).
Connect the A/V connecting cable
either to the Handycam Station or to
your camcorder, according to your
setup.
[1]
AN connecting cable with 5 VIDEO
(optional)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (optional), higher quality images
can be produced than with an A/V
connecting cable. Connect the white
and red plugs (left/right audio) and
the S VIDEO plug (S VIDEO channel)
of the A/V connecting cable with an
S VIDEO cable (optional). The yellow
plug connection is not necessary.
Connecting only the S VIDEO plug will
not output audio.
"
Notes
• Do not connect A/V connecting cables to both
your camcorder and the Handycam Station at
the same time. The image might get disturbed
(DCR-SR55E/SR65E/SR75E/SR85E).