Honda 2003 Accord Sedan Owner's Manual page 340

Main Menu Table of Contents
JACKING POINT
9. Locate the jacking point nearest
the tire you need to change. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
EXTENSION
WHEEL WRENCH
10. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
U.S. DX and LX models:
Do not attempt to forcibly pry the
wheel cover off with a screwdriver
or other tool. The wheel cover
cannot be removed without first
removing the wheel nuts.
Changing a Flat Tire
11. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
put it face down.
Taking Care of the Unexpected
CONTINUED
337