Honda 2003 Accord Sedan Owner's Manual page 321

Main Menu Table of Contents
Lights
Replacing Rear Bulbs
(in Trunk Lid)
TRIM CLIPS
1. Open the trunk.
2. 6-cylinder models
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
3. Carefully bend back the corner of
the trunk lid trim to expose the
bulbs.
318
Maintenance
4. Determine which of the two bulbs
is burned out: taillight or back-up
light.
5. Remove the socket by turning it
one-quarter turn counterclockwise.
6. Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
SOCKETS
BULBS
SOCKETS
BULBS
7. Install the new bulb in the socket.
8. Reinstall the socket into the light
assembly.
9. Test the lights to make sure the
new bulb is working.
10. Push the trunk lid trim back into
position.
11. Press the trim clip back into its
hole.