Honda 2003 Accord Sedan Owner's Manual page 317

Main Menu Table of Contents
Lights
BULB
TAB
6-cylinder models
5. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6. Turn on the headlights to test the
new bulb.
7. (Passenger's side)
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
314
Maintenance
Low Beam Headlight
HOLDING CLIPS
1. If you are changing the bulb on
the passenger's side, start the
engine, turn the steering wheel all
the way to the left, and turn off the
engine. If you are changing the
bulb on the driver's side, turn the
steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
5. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.