Table of Contents
Advertisement
Replacing the 4/64 SAN Switch power supply
The 4/64 SAN Switch uses two power supplies, as shown in
identifies the power supplies from right to left on the nonport side as Power Supply
#1 (on the right) and Power Supply #2 (on the left).
IMPORTANT:
Operate the switch with both power supplies to maintain redundancy.
1
1. Power supply 2
3. Power supply 1
Figure 33 4/64 SAN Switch power supplies on the nonport side
CAUTION:
Disassembling any part of the power supply voids the part warranty and regulatory
certifications. There are no user-serviceable parts inside the power supply.
Scale: 1/8" = 1"
2. Nonport side of switch
Figure
33. The Fabric OS
2
3
Scale:
5/16" = 1"
25187a
SAN Switch installation guide
99
Advertisement
Table of Contents
