Installation Steps, Overview - Fujitsu PRIMERGY RX300 S6 Operating Manual

2

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all , carefully read the safety instructions in
page 31 and following.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see
Ê The server includes loose parts. Keep these parts in a safe place. They are
designed to be used for installing optional components at a later time.
Ê Transport the server to the place where you want to set it up.
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Mount the server into the rack (see
the rack" on page
Ê Wire the server. To do this, refer to sections
server" on page 60
page 66.
Ê Connect the server to the mains (see
source" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX300 S6
"Unpacking the server" on page
12); print out the PDF files if required.
47).
and "Notes on connecting/disconnecting cables" on
63).
"Controls and indicators" on page
Operating manual
"Important information" on
"Installing/removing the server in/from
"Connecting devices to the
"Connecting the server to the power
46).
"Documentation
67).
29