Fujitsu PRIMERGY RX300 S6 Operating Manual page 122

Serial 2 (9-pin)
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45)
Onboard or integrated controllers
RAID Controller
SATA Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
Slots
PCI-Express 2.0 x4
(mech. x8)
PCI-Express 2.0 x8
122
1 x serial RS-232-C
1 x dedicated service LAN connector for iRMC S2
(10/100 Mbit/s) Service LAN traffic can be switched
to shared onboard Gbit LAN port
Modular RAID 0/1 controller with "Integrated
Mirroring Enhanced" (SAS IME) for SAS1.0.
RAID levels 0, 1 and 1E are supported for internal
hard disk drive configurations. For the Japanese
market only RAID level 1 is supported for internal
hard disk drive configurations.
Modular RAID 0/1 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0. RAID levels 0, 1,10 and 1E are supported
for internal hard disk drive configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50,6 and 60 are
supported for internal hard disk drive configurations.
ICH10B, 2 x SATA channel for DVD+backup
Integrated Remote Management Controller
(iRMC S2, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Infineon / separate module; TCG V1.2 compliant
(option)
5 x low profile from 4 PCIe slots each two wired x4
slots can be combined to one wired x8 slot
one PCIe-2 slot is occupied with one of two possible
modular RAID controllers
2 x low profile
Operating manual
RX 300 S6