Replacement Parts List - Cobra CR6 Installation And Operation Manual

Replacement Parts List

Only genuine qualified replacement parts should be used for the servicing and
repair of this appliance. The instructions supplied with the parts should be followed
when replacing components.
For further information and servicing instructions, contact your nearest qualified
service branch (contact details are as shown on the reverse of the front cover of this
manual).
When ordering spare parts, please quote the part number and the description as listed below. If the part
required is not listed below, request the part by description and quote model number and serial number
which is shown on the rating plate.
Open Burners
230014
230088
230631
230632
230288
230637
037210
037130
037120
037380
018680
231560
019428
230671
230606
Griddle
014105
230213
227403
230608
032200
032125
032120
032340
019215
026488
019217
018067
019428
230586
228047
230289
230059
230084
230091
230091
Part 7 Replacement Parts List
IMPORTANT:
Pot Stand.
Pot Stand Support.
Front Burner Assy.
Rear Burner Assy.
Burner Cap.
Gasket Burner Assy.
Injector (Nat. Gas)
Injector (LP Gas)
Injector (Butane)
Injector (Town Gas)
Gas Control Pintossi 20N
Gas Control Pintossi 20S
Thermocouple - (320mm).
Thermocouple - (500mm).
Knob - Open Burner.
Griddle Burner.
Griddle Reflector Assy.
Gas Control Valve.
Knob - Griddle.
Injector (Nat. Gas)
Injector (LP Gas)
Injector (Butane)
Injector (Town Gas)
Pilot Burner (Fully Assembled).
Pilot Injector (Nat. Gas)
Pilot Injector (LP Gas / Butane)
Pilot Injector (Town Gas)
Thermocouple - (320mm).
Piezo Ignitor.
Piezo H.T. Lead.
Grease Tray (1 per 300mm Griddle Section).
Griddle Plate 300mm.
Griddle Plate 600mm.
Griddle Plate 900mm.
Griddle Plate 900mm (CR9 Only).
Ø 2.10mm.
Ø 1.30mm.
Ø 1.20mm.
Ø 3.80mm.
(Standard Burners Only).
(Flame Failure '-F' Models Only).
Ø 2.00mm.
Ø 1.25mm.
Ø 1.20mm.
Ø 3.40mm.
0.35.
0.23.
0.60.
21