Replacement Parts List; Open Burners - Cobra CR6 Operation Manual

Replacement Parts List

Only genuine qualified replacement parts should be used for the servicing and
repair of this appliance. The instructions supplied with the parts should be followed
when replacing components.
For further information and servicing instructions, contact your nearest qualified
service branch (contact details are as shown on the reverse of the front cover of this
manual).
When ordering spare parts, please quote the part number and the description as listed below. If the part
required is not listed below, request the part by description and quote model number and serial number
which is shown on the rating plate.

Open Burners

230014
230088
230631
230632
230288
230637
037210
037130
037190
037120
018680
231560
019428
230671
230606
Griddle
014105
230213
227403
230608
032200
032125
019215
026488
019217
019428
230586
228047
230289
230059
230084
230091
Part 7 Replacement Parts List
IMPORTANT:
Pot Stand.
Pot Stand Support.
Front Burner Assy.
Rear Burner Assy.
Burner Cap.
Gasket Burner Assy.
Injector (Nat. Gas)
Injector (LP Gas [Propane])
Injector (Nat. Gas [G20])
Injector (Propane [G31])
Gas Control Pintossi 20N
Gas Control Pintossi 20S
Thermocouple - (320 mm).
Thermocouple - (500 mm).
Knob - Open Burner.
Griddle Burner.
Griddle Reflector Assy.
Gas Control Valve.
Knob - Griddle.
Injector (Nat. Gas)
Injector (LP Gas [Propane])
Pilot Burner (Fully Assembled).
Pilot Injector (Nat. Gas)
Pilot Injector (LP Gas [Propane])
Thermocouple - (320 mm).
Piezo Ignitor.
Piezo H.T. Lead.
Grease Tray (1 per 300 mm Griddle Section).
Griddle Plate 300 mm.
Griddle Plate 600 mm.
Griddle Plate 900 mm (CR9 Only).
Ø 2.10 mm (Non-UK).
Ø 1.30 mm (Non-UK).
Ø 1.90 mm (UK Only).
Ø 1.20 mm (UK Only).
(Standard Burners Only).
(Flame Failure '-F' Models Only).
Ø 2.00 mm.
Ø 1.25 mm.
0.35.
0.23.
20