Section 3 – Configuration
WPA uses an encryption method combined with an authentication
procedure that requires an acceptance of a pre-configured password.
WPA or Wireless Protection Access is an improved standard of wireless
security. The T-KD 318 also supports two common encryption types
TKIP and AES (explained below).
To configure WPA settings, select WPA-Personal in the Security Mode
drop-down list.
Select WPA to use TKIP encryption or select WPA2 to use AES
encryption in the WPA Mode drop-down list. The encryption algorithm
TKIP (Temporal Key Integrity Protocol) uses per packet key generation
(based on WEP), while AES (Advanced Encryption Standard) is a block-
based encryption method. Both methods require entry of a pre-shared
key to allow association. Type a password from 8 to 64 characters long
in the Pre-Shared Key field.
Click the Apply Settings button to save the settings.
D-Link DSL-2740R User Manual
WPA-Personal
30