Wep - D-Link DSL-2740R User Manual

Section 3 – Configuration
WEP (Wireless Encryption Protocol or Wired Equivalent Privacy)
encryption can be enabled for security and privacy. WEP encrypts the
data portion of each frame transmitted from the wireless adapter using
one of the predefined keys. Decryption of the data contained in each
packet can only be done if both the receiver and transmitter have the
correct key.
By default, authentication is disabled on the access point. To enable
WEP, select WEP in the Security Mode drop-down list.
Select the WEP Key Length from the drop-down menu. The available
key lengths are 128 bit(26 hex digits) or 64 bit(10 hex digits)
encryption. In the spaces provided, type in WEP Key 1, WEP Key 2,
WEP Key 3 and WEP Key 4. The length of the character string used for
the keys depends on the level (Key Length) of encryption selected.
Only one key can be active. The active key is selected in the Default
WEP Key drop-down list.
Click the Apply Settings button to save the settings.
D-Link DSL-2740R User Manual

WEP

29