Advanced Lan - D-Link DSL-2740R User Manual

Section 3 – Configuration
To access the Advanced LAN window, click the Advanced LAN button in the Advanced directory.
UPnP supports zero-configuration networking and automatic discovery
for many types of networked devices. When enabled, it allows other
devices that support UPnP to dynamically join a network, obtain an IP
address, convey its capabilities, and learn about the presence and
capabilities of other devices. DHCP and DNS service can also be used if
available on the network. UPnP also allows supported devices to leave a
network automatically without adverse effects to the device or other
devices on the network. UPnP is a protocol supported by diverse
networking media including Ethernet, Firewire, phone line, and power
line networking.
To enable UPnP for any available connection, tick the Enable UPnP
check box, select the connection or connections on which you will
enable UPnP listed under Available Connections and click the Apply
Settings button. Click the Reboot button on the left panel to let your
changes take effect.
When "Enable Multicast Streams (IGMP)" is ticked, Multicast packets
are allowed to pass in both directions on the WAN interface. Most users
will want to leave this on. Click Apply Settings.
D-Link DSL-2740R User Manual

Advanced LAN

47