Maintenance - Makita VC1310L Instruction Manual

NOTE:
Models VC2510L and VC3210L have
•
no mounting position marking and no
need to align it.
Before using the powder filter, make
•
sure that prefilter and damper are
always used together. It is not allowed
to install powder filter solely.
Before using the paper pack, make sure
•
that powder filter, damper and prefilter
are always used together.
Carrying the cleaner
011610
When carrying the cleaner, carry it by
holding the handle on the head as shown in
the figure. The handle is retractable at the
head when not in use.
1. Handle
1
2. Head
2

MAINTENANCE

CAUTION:
Always be sure that the tool is switched
•
off and unplugged before attempting to
perform inspection or maintenance.
Storage of power supply cord
For Model VC1310L only
011633
011597
Pull out the cord hook or open the base
hook. Wind up the power supply cord and
hang it on the cord hook or wind it around
the base hook.
NOTE:
Do not force the power supply cord off
•
the cord hook when trying to disconnect
it from there. Forcing power supply cord
to disconnect from the cord hook may
cause damage to the cord
12
1. Cord hook
2. Power supply
1
cord
2
1. Power supply
1
cord
2. Base hook
2