Symbols - RIDGID RD80701 Operator's Manual

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Construction
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Risk of Injection
Kickback
Electric Shock
NAME
Indicates a potential personal injury hazard.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
To reduce the risk of injection or injury, never direct a water stream
towards people or pets or place any body part in the stream. Leak-
ing hoses and fittings are also capable of causing injection injury.
Do not hold hoses or fittings.
To reduce the risk of injury from kickback, hold the spray wand
securely with both hands when the machine is on.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
5 — English
DESIGNATION/EXPLANATION