Defining Policy Binding - Linksys SFE2000 Reference Manual

• Ingress Committed Burst Size (CBS) — Defines the CBS in bytes per second. This field is only
relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the Police value is Single. Possible values are:
– Drop — Drops packets exceeding the defined CIR value.
– Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
– None —Forwards packets exceeding the defined CIR value.
2. Define the relevant fields.
3. Click Apply. The QoS policy profile is defined, and the device is updated.

Defining Policy Binding

1. Click Quality of Service > Advanced > Policy Binding. The Policy Binding Page opens:
The Policy Binding Page contains the following fields:
• Interface — Displays the interface to which the entry refers.
• Policy Name — Displays a Policy name configured to the interface.
2. Click the Add button. The Add QoS Policy Binding Page opens:
Chapter 12:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Policy Binding Page
Chapter
12
203