Defining Trap Management; Defining Trap Settings - Linksys SFE2000 Reference Manual

Defining Trap Management

The Defining Trap Management section contains the following pages:
•

Defining Trap Settings

• Configuring Station Management
• Defining SNMP Filter Settings
Defining Trap Settings
1. Click System > SNMP > Security > Trap Management > Trap Settings. The Trap Settings Page
opens:
The Trap Settings Page contains the following fields:
• Enable SNMP Notification — Specifies whether the device can send SNMP notifications. The
possible field values are:
– Enable — Enables SNMP notifications.
– Disable — Disables SNMP notifications.
• Enable Authentication Notification — Specifies whether SNMP authentication failure notification
is enabled on the device. The possible field values are:
Chapter 11:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Trap Settings Page
Chapter
11
175