How To Enter Console Emulation Mode; How To View The Event Log; How To Send Emergency Messages - Honeywell Tuxedo Touch User Manual

How to Enter Console Emulation Mode

To access Console Emulation Mode, do the following:
ICON
1. From the Home screen, press the
SECURITY icon.
2. Press the MORE CHOICES icon.
3. Press the CONSOLE MODE icon.

How to View the Event Log

Your system has the ability to record various events in a history log wherein each event is recorded with the time and date of its
occurrence. The control panel must be programmed to record various system events in the installer programming mode.
To view the Event Log, perform the following:
ICON
1. From the "Home" screen, press Security
and then the MORE CHOICES icon.
2. Press the EVENT LOGS icon; the first eight
events are displayed. Move the scroll bar
down to view the full list of events.
3. Select the Partition that you want to view
Events for (or select All Partitions).
4. Select the type of Event to view (or select
ALL); the events are displayed with the
number of times of its occurrence.

How to Send Emergency Messages

An emergency message for fire, panic, or medical can be sent to the central monitoring station from the Emergency screen. The
Emergency screen can be accessed by activating the "PANIC" Icon located on the lower right corner of the screen. Perform the
following to send an emergency message.
ICON ACTION
1. Press the PANIC Icon.
2. Press and hold (for at least 2
seconds) the associated alarm icon
(FIRE, PANIC, SILENT PANIC or
MEDICAL).
Emergency Icons
Panic Silent Panic
Fire
Security (cont'd)
ACTION
Perform functions as you would from a standard alpha keypad.
ACTION
You are immediately returned to the screen from which you pressed the "PANIC" Icon.
NOTE: The Emergency screen cannot be accessed while running a screen
diagnostic test or while in the clean screen mode.
Note: The panic button disables during latching and unlatching of Z-Wave doors,
while running screen diagnostic testing, when in clean screen mode and when
refreshing Z-Wave device status.
•
Emergency messages are optional and may not be available on your system. Ask
your system installer if emergency messages are available on your system.
NOTE: Medical functionality has not been evaluated by UL and may not be used in
Medical
UL Listed applications.
NOTES
NOTES
Each type of Event can be viewed by category; select from ALL, System,
Alarms, Troubles, Bypasses and Open/Close events.
NOTES
18