Honeywell Tuxedo Touch User Manual page 23

Setup a WLAN (Wi-Fi) Connection
From the IP Setup screen, add a WLAN network connection as follows:
ICON
1. At the Tuxedo Touch keypad:
a) Press the WIFI ON button.
- Use the scroll bar to locate a network
from the list of Wifi Networks to connect
to and highlight that field. Press the
Refresh icon until available networks are
displayed.
- Or, select Add Network and highlight
each field to enter the required
information for SSID, Security Mode,
Passphrase/Shared Key and Port # on the
"Data Entry Keyboard" and press GO.
2. Press the Save icon; the information will
automatically update. This may take up to
60 seconds.
3. At your PC, Smart Phone or Tablet browser,
start your browser and enter your IP
Address.
Note: If left inactive, Web connections
disconnect after 10 minutes.
Account Setup
Account setup provides a browser log-on page for higher security when viewing from a PC, Smart Phone or Tablet. Up to 5
accounts can be created. To set up a user account, do the following:
ICON
1. Press the Account Setup button.
2. If required, highlight the User
Name/Password fields on the list and enter
the data for each on the "Data Entry
Keyboard"; press GO.
3. Press the Save icon. The new user is
displayed on the screen.
4. Press the Clear button to clear the User
information.
Setup (cont'd)
ACTION
ACTION
NOTES
A pop-up window displays:
This will switch off LAN Network, do you want to continue? Yes or No
Use the Data Entry Keyboard to enter the required information.
• Press the "up arrow" key to switch to capital letters.
• Press the Space key to add a space between characters.
•
Press the x key to delete/backspace.
•
Press the ABC/.?123 key to switch between numerals and
symbols/characters.
•
Press the "#+=" key to switch to symbols.
•
Press GO to return to previous screen.
A pop-up window displays:
Network Details Saved
A pop-up window displays the message:
Settings saved.
Select OK to save.
Note: To change the default port number (6280), press the field next to port
number and on the data entry keyboard enter a secondary port number
between 5000-65534. Press GO and then press Save.
A pop-up window displays: Success Network Details Saved
Port number changed. Keypad is going to reset
The keypad will reboot with the newly configured port number.
NOTES
Note: A password is required if logging in from a remote location (not using
the premises network).
A Confirmation window displays the message:
Settings saved.
The ENABLED button is displayed when a successful network connection
is completed.
23