AEG SOLO 10 User Manual page 21

• From the home screen, press
• Press to "ANSW MACHINE" and then press
to select "DELETE ALL" and then press
• Press
• Press again to confirm.
>A confirmation beep is played.
• Press to return to standby mode.
16.6 Outgoing Message (OGM)
When the answering system answers a call, the pre-recorded outgoing message is played to the caller
unless you have recorded your own outgoing message.
The phone comes with two pre-recorded outgoing messages (OGM) for the respective answer modes:
"ANSWER ONLY" and "ANSW. & RECORD".
By default, the answer mode is "ANSW. & RECORD", which allows a caller to leave a message on
the answering machine after hearing the announcement. This can be changed to "ANSWER ONLY"
mode, which does not allow callers to leave any messages on the answering machine after hearing the
announcement.
16.6.1 Record a Personalised Outgoing Message
You can choose to replace the default OGM with your own personalised messages.
• From the home screen, press
• Press to "ANSW MACHINE" and then press
• Press to "RECORD OGM" and then press
• Press to select "ANSWER ONLY" or "ANSW. & RECORD" and then press
• Press to "RECORD OGM" and press
>A confirmation beep is played.
• Speak into the handset to start recording your new outgoing message and press
the recording.
>A confirmation beep is played.
• Press to return to standby mode.
Note:
The maximum length of an outgoing message is 2 minutes.
16.6.2 Listen to an Outgoing Message
• From the home screen, press
• Press to "AnSW MACHInE" and then press
• Press to "RECORD OGM" and then press
• Press to select "AnSWER OnLY" or "AnSW. & RECORD" and then press
• Press to select "PLAY".
>The outgoing message plays through the phone's speaker.
>Press if you wish to listen to the outgoing message privately over the earpiece.
• Press to return to standby mode.
16.6.3 Delete a Personalised Outgoing Message
If you want to return to using the default OGM, simply delete your personalised OGM.
• From the home screen, press
• Press to "AnSW MACHInE" and then press
• Press to "RECORD OGM" and then press
• Press to select "AnSWER OnLY" or "AnSW. & RECORD" and then press
• Press to "DELETE" and press
>The default pre-recorded outgoing message is played.
• Press to return to standby mode.
.
to select.
.
to select.
to select.
.
.
to select.
to select.
.
to select.
to select.
to confirm.
.
20
to confirm.
key again to end
to confirm.
to confirm.