AEG SOLO 10 User Manual page 17

14.2 Register Additional Handsets
• Press and hold the key under the base unit for approximately 5 seconds.
>The message indicator on the base will flash for up to 1 minute, while it is in registration mode.
• On the handset, press
• Press to "ADVAnCED SET" and then press
• Press to "REGISTRATIOn" and then press
>If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If
this happens, repeat from step 1.
• Enter the Master PIn and then press
Note:
The default Master PIn is 0000.
>WAITInG flashes on the screen.
>A confirmation tone is played to indicate successful registration, and the handset will return to standby
mode, with its handset number displayed.
>If no base is found with the entered PIn, error tones are played to indicate failed registration and the
handset returns to standby mode. You will need to repeat from step 1 above.
14.3 Un-register your Handset
You can unregister the handset you are using.
• From the home screen, press
• Press to "ADVAnCED SET" and then press
• Press to "UnREGISTER" and then press
• Enter the Master PIn and then press
Note:
The default Master PIn is 0000.
• Press to select the handset number to un-register and then press
cancel the un-registration procedure.
>A confirmation tone is played to indicate successful un-registration.
>If no action is taken on the handset within 15 seconds, the un-registration procedure will be aborted
and the handset returns to standby mode.
14.4 Change the Master PIN
The Master PIn is used for registration/un-registration of handsets and for accessing the answering
machine remotely. The default Master PIn number is 0000. The maximum length of the Master PIn is 8
digits.
Note:
If you forget your PIn code, you can reset it to its default 0000 using a handset Reset. (See Reset the Unit.)
• From the home screen, press
• Press to "ADVAnCED SET" and then press
• Press to "CHAnGE PIn" and then press
• Enter the current Master PIn and then press
>The PIn will be shown as asterisks (*) on the screen as you enter them.
• Enter the new PIn and then press
>A confirmation tone is played.
14.5 Set the Auto Prefix
You can set the phone to detect a dialling number and replace it with another number.
You can enter up to 5 digits for the number to be detected, which can be replaced with an auto prefix
number of up to 10 digits.
• From the home screen, press
• Press to "ADVAnCED SET" and then press
• Press to "AUTO PREFIX" and then press
• Press again to enter "DETECT DIGIT".
to select.
to select.
to confirm.
to select.
to select.
to confirm.
to select.
to select.
to confirm.
to confirm.
to select.
to select.
16
to confirm or press to