Cisco DVR Configuration Manual page 50

Chapter 3 Testing DVR Services
6 Did you customize any DVR behaviors?

If yes, verify that DVR behaviors function according to your customizations.
Go to step 7.

If no, you are finished with this procedure.
7 Test the following DVR behaviors to verify that they function according to your
customizations:

Recording While Watching Behavior: Press
select Record from the Quick Settings menu to verify that you can record a
currently tuned program.

DVR Channel Display Behavior: Tune to the DVR channel to verify that the
DVR displays the Recorded List screen and not the generic DVR screen.
 Custom Logo Behavior (msologonotipg.rle): Press
Recorded List screen and verify that the cable service provider logo appears
in the screen.

Recording Control Behavior: If you have prevented any service, such as a
Music Choice service from being recorded, tune to the channel where the
service is broadcast and attempt to record the service. The DVR should
prevent you from recording the service and should display the following
message: ATTENTION: Recording feature not available on this channel.

First Runs Recording Behavior: Set up the All Episodes feature to record an
episode that is being rerun. The DVR should not record an episode that is
being rerun.

Power Save Behavior: Verify that the test set-top remains powered on during
any 15-minute period of inactivity that occurs between 1 a.m. and 6 a.m.
 Screen-Saver Logo Behavior: Verify that the cable service provider logo
appears on the Screen Saver during any 15-minute period of inactivity that
occurs between 1 a.m. and 6 a.m.

Stand-Alone Authorization Behavior: If the test DVR has no recordings
saved in the Recorded List, record some live TV so that a recording is saved
to the hard disk drive. Then disconnect the DVR from the DBDS network and
reboot it to verify that the Stand-Alone mode screen displays. Verify that you
can play a recording while disconnected from the DBDS network.
8 Does the DVR services function according to your customized behaviors?

If yes, you have successfully set up DVR services.

If no, contact Cisco Services for assistance.
42
on the remote control, or
to display the
4011411 Rev B