Dvr Channel Display: Display The Recorded List When Tuning To The Dvr Channel - Cisco DVR Configuration Manual

DVR Channel Display: Display the Recorded List
when Tuning to the DVR Channel
This section describes how to customize the DVR service so that the Recorded List
displays instead of the default screen whenever subscribers tune to the DVR
channel. Otherwise, the generic DVR service screen displays whenever subscribers
tune to the DVR channel.
Displaying the Recorded List when Tuning to the DVR Channel
1 On the DNCS Administrative Console, click the Application Interface Modules
tab.
2 Click SAM Service. The SAM Service List window opens.
3 Click File, and then select New. The Set Up SAM Service window opens.
4011411 Rev B

DVR Channel Display: Display the Recorded List when Tuning to the DVR Channel

19