Function And Operation - Hitachi VK-S454ER User Manual

Auto AWB
Color & B/W Transition
Auto BLC
Auto Frame Accumulating
OSD Menu
Chinese/English Menu
OSD menu display; change the information and parameter of the camera by keyboard and OSD,
operation becomes simple and easy.
Auto activation function can be set, evoking presets or starting up tours, auto leaning and horizontal
scan can be set when the camera is not in use
Restoring operation before power-down or carry out appointed operation
Internal Temperature Detector
Real-time temperature display
Fans start up when the temperature exceeds the upper limit
Speed dome will postpone starting up when the temperature is lower than the lower limit
The fans start up according to real time temperature detection, which makes the fans longevity longer
Real Time Clock Function
Real time display, clock can be set
Real time color & B/W transforming time
Alarm time can be set

3. Function and Operation

This chapter describes the main function and the realize principle of the speed dome and does not
involved in operation. Different system has different method of operation. Usually we use the operation
manual from the system company. If you have any special requirements, please contact the system
company to get the necessary information.
3.1 Set the Camera Coding
There are two code switches on the camera's pin board, SW1 and SW2, SW1 sets camera address, and
SW2 sets baud rate and protocol (See 'Camera Settings' on P38).
Besides the factory protocol, the camera compatible with many main protocol, like: PELCO-D, PELCO-P
etc. ( Optional ALEC, VCL, MOLYNX, VICON, SANTACHI, PANASONIC, SAMSUNG, DIAMOND,
KALATEL, LILIN, PHILIPS and AD and so on.)
Any of the control order must be based on the address. of the target camera, the camera just respond to
the order that has the same add of itself. Three types of the address.
Code switch address. Set by the Code switch on the bracket in the camera (SW1), add. Range:1-255
Broadcast address: If the customer prefers to use broadcast address, all of the camera in the system
will carry out the same action; system 255 is the broadcast address.
Debugging address: (factory protocol and PELCO protocol only): if the address of the camera is 0, the
user can control the camera by any address.
3.2 Auto Carry Out the Operation
Focus / Rev Automatic Matching
When we use manual adjustment, in the case of far focus, the camera high speed reaction cause the
rocker shock may cause the image whisk or image lost. Based on humanization design, the camera
automatically adjusts the rev of the tripod head according to the focus. And make the manual tracking
object easier.
High Speed Dome Camera User's Manual
- 5 -