Attention - Hitachi VK-S454ER User Manual

1. Attention

Electric Safety
The national and local electric safety standard must be obeyed during the installation.
Shipping with Care
Prevent the damage caused by stress, strenuous vibration and moist during the shipping, storing and
installation. The products are packed individually, and will not be in warranty due to the damage caused by
whole-packaging in shipping.
Careful Installation
Please refer to the instruction manual carefully. Do not install the camera in opposite direction, and h andle
the camera block with care; do not press against the structural element, which may cause mechanical
problem. The plastic cover is advanced optical product, please don't touch it directly to avoid the cover
scratch and bad image quality
Do Not Disassembly The Camera Without Authorization
Do not tear down the screws and protecting cap of the camera block. There are no spare parts in the
camera block for users' maintenance, and only the professional engineers shall check and maintain the
camera.
Environmental Requirement
Indoor Environmental Requirement:
Temperature: -10º ~ +50º
Humidity : 90%
Atmospheric Pressure: 86 ~ 106Kpa
AC Supply: 24V / 2000mA, 50 / 60HZ
Outdoor Environmental Requirement
Temperature: -40º ~ +60º
Humidity : 90%
Atmospheric Pressure: 86 ~ 106Kpa
AC Supply: 24V / 2500mA, 50 / 60HZ
Do Not Aim Objects in Strong Light
Do not aim the objects in strong light or the sun to avoid the image blur and spectacle , no matter the
camera is in use or not.
Waterproof
The outdoor speed dome cameras are featured as waterproof, damp proof and dustproof, and could meet the
international standard IP66. The indoor speed dome camera can not be installed at the place where there is full of
hydrosphere and water. The water drops and
2. Speed dome camera performance characteristics
.
splashing may damage the inside components of both the indoor and outdoor cameras.
High Speed Dome Camera User's Manual
- 3 -