Tour Setup - Hitachi VK-S454ER User Manual

MAIN MENU
1. DISPLAY SETTINGS
2. CAMERA SETTINGS
3. PRIVACY MASK
4. USER PROGRAM
5. SYSTEM SETTINGS
6. LANGUAGE/
7. EXIT
USER PROGRAM
1. PRESET SETUP

2. TOUR SETUP

3. AUTO LEARNING
4. SCAN SETUP
5. TIMER SETUP
6. ALARM SETUP
7. RETURN
TOUR SETUP
1. NO.
2. STAY TIME: 001
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
3. EXECUTE
4. RETURN
8.2 Tour Setup
Auto Tour is defined as a sequential moving from preset to preset and dwell for a specific time
at each preset. It is useful if you need to repeat switching among a number of presets. Each
sequence can contain up to 32 presets and dwell time for each preset is independent.
1. Press 'Menu' on the keyboard or evoke the presets no. 95 and 64 to enter the main menu, or
press the preset no.1 twice continuously within 1 second.
2. Move the cursor to [USER PROGRAM]. Move the joystick to enter the sub-menu.
3. Move the cursor to [TOUR SETUP], and then enter the sub-menu.
4. Tour Number Setup: set the tour no. within 0~4. Move the cursor to [STAY TIME] to edit it
from 000-255(seconds).
5. Tour Line Setup: Move the cursor to "00-00-00...00" Move the joystick to activate the first
position, and then circumvolve the cap of rocker to adjust the number of preset. Move the
cursor to next position, move again the cursor to last position. The range of the presets is
1—80, each route can be setup 32 presets.
6. Execute: move the cursor to [EXECUTE]; the camera will implement this function.
High Speed Dome Camera User's Manual
- 18 -