Cisco IOS XE Intelligent Services Configuration Manual page 286

Configuring ISG Policies for Session Maintenance
Restrictions for Troubleshooting the Session Maintenance Timers
Because debugging output is assigned high priority in the CPU process, it can render the system
Caution
unusable. For this reason, use the Cisco IOS debug commands only to troubleshoot specific problems
or during troubleshooting sessions with Cisco technical support staff. Moreover, it is best to use debug
commands during periods of lower network traffic and fewer users, or on a debug chassis with a single
active session. Debugging during these periods decreases the likelihood that increased debug command
processing overhead will affect system use.
Debug Commands Available for the Session Maintenance Timers
Table 1
timers.
Table 1
Command
debug subscriber feature error
debug subscriber feature event
debug subscriber feature name idle-timer error
debug subscriber feature name idle-timer event
debug subscriber feature name session-timer error Displays session timer errors.
debug subscriber feature name session-timer event Displays session timer events.
Enabling the Session Maintenance Timer Debug Commands
Perform this task to enable the session maintenance timer debug commands.
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
lists the debug commands that can be used to diagnose problems with the session maintenance
Debug Commands for Troubleshooting Session Maintenance Timers
enable
debug command
end
How to Configure Policies for Session Maintenance Timers
Purpose
Displays general Feature Manager errors.
Displays general Feature Manager events.
Displays idle timer errors.
Displays idle timer events.
Purpose
Enables higher privilege levels, such as privileged EXEC
mode.
Enter your password if prompted.
•
9