Cisco IOS XE Intelligent Services Configuration Manual page 229

Configuring ISG Network Forwarding Policies
What to Do Next
You may want to configure a method of activating the service policy map; for example, control policies
can be used to activate services. For more information about methods of service activation, see the
module
Configuring Network Policies for IP Sessions in Service Policy Maps
Network policies can be configured in user profiles or service profiles on an external AAA server or in
a service policy map on the ISG device. Perform this task to configure a network forwarding policy for
IP sessions in a service policy map on the device.
If a network forwarding policy is not specified in a user profile, service profile, or service policy map, a
Note
subscriber session will inherit the network forwarding policy from another source. See the
"Configuration Sources for Network Policies" section on page 2
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
policy-map type service policy-map-name
Example:
Router(config)# policy-map type service
service1
"Configuring ISG Subscriber Services."
enable
configure terminal
policy-map type service policy-map-name
ip vrf forwarding name-of-vrf
sg-service-type primary
How to Configure ISG Network Policies
for more information.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Creates or modifies a service policy map, which is used to
define an ISG service.
5