Cisco IOS XE Intelligent Services Configuration Manual page 101

Configuring ISG Access for IP Subscriber Sessions
Command or Action
Step 6
end
Example:
Router(config-subscriber)# end
Creating ISG IP Interface Sessions
An ISG IP interface session encompasses all IP packets that cross the specified interface or subinterface.
Perform this task to create an ISG IP interface session.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface type number[.subinterface-number]
Example:
Router(config)# interface GigabitEthernet
0//0/0.1
Step 4
ip subscriber interface
Example:
Router(config-subif)# ip subscriber interface
Step 5
end
Example:
Router(config-subif)# exit
enable
configure terminal
interface type number[.subinterface-number]
ip subscriber interface
end
How to Configure ISG for IP Subscriber Sessions
Purpose
(Optional) Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Specifies an interface or subinterface and enters interface
configuration mode.
Specifies the type of IP subscriber to be hosted on the
interface.
(Optional) Returns to privileged EXEC mode.
17