Makita 9015DB Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Grinder
  5. 9015DB
  6. Instruction manual
Makita 9015DB Instruction Manual

Makita 9015DB Instruction Manual

125 mm (5”) and 150 mm (6”) model
Hide thumbs Also See for 9015DB:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Information
Angle Grinder
125 mm (5")
MODEL 9015DB
150 mm (6")
MODEL 9016DB
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
w w w . m a k i t a t o o l s . c o m
DOUBLE
INSULATION
M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Makita 9015DB

Summary of Contents for Makita 9015DB

  • Page 1 Angle Grinder 125 mm (5”) MODEL 9015DB 150 mm (6”) MODEL 9016DB DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using.

  • Page 2: Specifications

    SPECIFICATIONS model 9015DB 9016DB No load speed (RPM) 10,000/min 9,000/min Overall length 391 mm (15-3/8”) 391 mm (15-3/8”) Net weight 2.4 kg (5.3 lbs) 2.4 kg (5.3 lbs) Spindle thread 5/8” 5/8” • Manufacturer reserves the right to change specifications without notice.
  • Page 3 5. Avoid body contact with grounded sur- be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection. faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of Tool Use and Care electric shock if your body is grounded. 15.

  • Page 4: Specific Safety Rules

    24. When servicing a tool, use only identical Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of replacement parts. Follow instructions in the Maintenance section of this manual. electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw.
  • Page 5 8. Be careful not to damage the spindle, the poor installation or a poorly balanced flange (especially the installing surface) wheel. or the lock nut. Damage to these parts 15. Use the specified surface of the wheel to could result in wheel breakage. perform the grinding.

  • Page 6: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock 001025 CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. Press the shaft lock to prevent spindle rotation when install- ing or removing accessories.

  • Page 7: Wheel Guard

    Installing or removing wheel guard 001063 CAUTION: • When using a depressed center grinding wheel/Multi- disc, wire wheel brush or cut-off wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator. Mount the wheel guard with the protrusion on the wheel 1.

  • Page 8: Abrasive Disc

    Installing or removing abrasive disc 001111 (optional accessory) NOTE: • Use sander accessories specified in this manual. These must be purchased separately. Mount the rubber pad onto the spindle. Fit the disc on the rubber pad and screw the lock nut onto the spindle. To 1.

  • Page 9: Wire Wheel Brush

    Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction. Operation with wire cup brush 001140 (optional accessory) CAUTION: • Check operation of brush by running tool with no load, insuring that no one is in front of or in line with brush.
  • Page 10 Unplug tool and place it upside down allowing easy access to spindle. Remove any accessories on spindle. Thread wire wheel brush onto spindle and tighten with the wrenches. When using wire wheel brush, avoid applying too much pres- sure which causes over bending of wires, leading to prema- ture breakage.
  • Page 11 A cut-off wheel can also be used with an optional guard for model 9015DB. If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service center, be sure to obtain and use all necessary fasteners and guards as recommended in this manual.

  • Page 12: Table Of Contents

    001183 9015DB 9016DB Grip 36 Wheel guard Inner flange 45 Inner flange 82 Depressed center grinding wheel/Multi-disc Lock nut 5/8-45 Lock nut 5/8-40 Rubber pad 115 Rubber pad 125 Abrasive disc Sanding lock nut 5/8-48 Wire wheel brush Urethane washer 14...
  • Page 13 First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold...
  • Page 14 Design Repair Service Industrial Maintenance Features Durability Home Maintenance Size Power Hobby Price Other ( Other ( Makita Brand 5. Any comments: DATE PURCHASED MODEL NO. MONTH YEAR SERIAL NO. STATUS INTL. LAST NAME / COMPANY NAME Married Single STREET ADRESS...
  • Page 15 Date Purchased When you need service: Send complete tool (prepaid) to one Dealer’s Name & Address of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of Model No.

  • Page 16: Warranty Policy

    MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.

This manual is also suitable for:

9016db

Table of Contents