Carrier Side Plate And Carrier Front Plate - Honda HP400 Owner's Manual

Carrier Side Plate and Carrier Front Plate
Side plates
Loosen the 4 lock bolts on the left and right sides, and pull out the carrier side
plates in a horizontal direction so that the left and right sides are even (within
7.5 in) and the load is centered. After pulling out the side plates, tighten the lock
bolts securely.
LOCK BOLT
Front plate
Loosen the 2 lock bolts and pull out the front plate to suit the length of the load.
After pulling out the front plate, tighten the lock bolts securely.
460
mm
(18.1 i
Maximum extension:
Side plate: 190 (7.5 in) mm each sid
Front plate: 460 (18.1 in) mm
pz?zE-j
l
If the unit is used with the plates extended beyond the above
dimensions, the carrier plates may come off, resulting in loss of the
load.
l
Use of the unit with the side plates extended and the front plate pulled
out is limited to light loads transported over flat terrain.
27