Using The Front Stopper Plate - Honda HP400 Owner's Manual

Using the front stopper plate
To open the front stopper plate, observe the following:
1. Slowly press down on the right and left lock release levers.
m
A
.
0
Do not push the release levers quickly, or the stopper plate
will swing open suddenly.
2. Pull the top of the stopper plate down slowly until it is horizontal and is
locked securely.
3. Check that the plate is locked securely by lifting it upward.
To close the stopper plate, observe the following:
1. Release the loscks by pushing the release levers down, then raise the plate
upright until locked.
2. Make sure that the plate is locked securely by pulling it downward.
I
FRONT STOPPER
LbCK RELEASE
LEVERS
A
m Do not use the power carrier with the front stopper plate
.
0
opened on slopes in excess of 15 degrees.
25