Checklist For Installing The Cisco Unified Ip Phone 7906G And 7911G - Cisco 7906G Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone

Checklist for Installing the Cisco Unified IP Phone 7906G and 7911G

Table 1-5 Checklist for Installing the Cisco Unified IP Phone 7906G and 7911G Series in
Cisco Unified CallManager
Task
1. Choose the power source for the
phone:
Power over Ethernet (PoE)
–
External power supply
–
2. Assemble the phone, adjust phone
placement, and connect the network
cable.
3. Monitor the phone startup process.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
Table 1-5 provides an overview and checklist of installation tasks for the
Cisco Unified IP Phone 7906G and 7911G. The list presents tasks in a suggested
order to guide you through the phone installation process. Some tasks are
optional, depending on your system and user needs. For detailed procedures and
information, refer to the sources in the list.
Purpose
Determines how the phone
receives power.
Locates and installs the
phone in the network.
Verifies that phone is
configured properly.
For More Information
See the "Providing Power to the
Cisco Unified IP Phone 7906G
and 7911G" section on
page 2-4.
See the "Installing the
Cisco Unified IP Phone" sec-
tion on page 3-10.
See the "Verifying the Phone
Startup Process" section on
page 3-16.
1-29