Cisco 7906G Administration Manual page 175

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-2 Status Messages on the Cisco Unified IP Phone 7906G and 7911G (continued)
Message
Error Verifying
Config Info
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Description
The name-based and default
configuration file was not
found on the TFTP Server.
Possible Explanation and Action
The configuration file for a phone is created
when the phone is added to the
Cisco Unified CallManager database. If the
phone has not been added to the
Cisco Unified CallManager database, the
TFTP server generates a
response.
Phone is not registered with
•
Cisco Unified CallManager.
You must manually add the phone to
Cisco Unified CallManager if you are not
allowing phones to auto-register. See the
"Adding Phones to the
Cisco Unified CallManager Database"
section on page 2-12
If you are using DHCP, verify that the
•
DHCP server is pointing to the correct
TFTP server.
If you are using static IP addresses, check
•
configuration of the TFTP server. See the
"Network Configuration Menu" section
on page 4-7 for details on assigning a
TFTP server.
Status Menu
CFG File Not Found
for details.
7-9