Makita 5007NB-A Instruction Manual page 9

Bevel
cutting
Loosen the nut on the bevel scale plate on
the front of the base. Set for
a
desired
angle (0
-
45") by tilting accordingly, then
tighten the nut firmly.
Sighting
For straight cuts, align the right notch on
the front of the base with your cutting line
on the vyorkpiece.
For 45" bevel cuts, align the small notch
in the front of the base with
it.
For 45"
- 1
1 -
For
straight
bevel cuts
cuts
(90")
i j
-+,
Base plate
Switch action
To start the tool, simply pull the trigger.
Release the trigger to stop.
CAUTION
:
Before plugging in the tool, always check
to see that the trigger switch actuates pro-
perly and returns to the 'OFF" Position
when released.
Fig. 13
9