Honda P/N 08E51-S01-101F Installation Instructions Manual page 8

25. At the fuse box, unplug the 5-pin (brown) and 16-pin
(blue) connectors. Plug the connectors marked B of
the security harness in between.
VEHICLE
16-PIN CONNECTOR
(BLUE)
26. Unplug the 7-pin connector (brown) from the top of
the fuse box, and plug the connectors marked C of
the security harness in between.
VEHICLE
7-PIN CONNECTOR
(BROWN)
SECURITY HARNESS 7-
PIN CONNECTOR
(MARKED C)
8 of 10
VEHICLE
5-PIN CONNECTOR
(BROWN)
SECURITY
HARNESS
27. Locate the 6-pin connectors (gray) near the steering
hanger beam, and unplug them. Plug the connectors
marked A of the security harness in between.
28. Plug the connector marked D of the security harness
into the No. 5 connector on the fuse box.
29. Plug the 22-pin connector of the security harness
into the control unit you installed in step 18.
SECURITY
HARNESS 22-PIN
CONNECTOR
AII 20447 (9908)
VEHICLE
6-PIN CONNECTOR
(GRAY)
No.
5
CONTROL
UNIT
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
STEERING
HANGER
BEAM