Honda P/N 08E51-S01-101F Installation Instructions Manual page 7

20. Attach the fuse labels (3A) to the two fuse cases of
the security system harness.
FUSE LABEL
(3A)
6-PIN RELAY
ELECTRICAL
TAPE
21. Connect the 4-pin relay and the 6-pin relay to the
security harness connectors, then secure them to
the security harness with electrical tape.
22. Attach the security harness to the vehicle harness
with one wire tie in the area shown.
VEHICLE
HARNESS
WIRE TIE
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
4-PIN
RELAY
FUSE LABEL
(3A)
ELECTRICAL
TAPE
SECURITY
HARNESS
Branch position of
security harness
23. Unplug the 7-pin connector from the light switch, and
plug the connectors marked F of the security
harness in between.
LIGHT SWITCH
24. Attach the security harness to the vehicle harness
with one wire tie in the area shown.
AII 20447 (9908)
SECURITY
HARNESS
VEHICLE 7-PIN
CONNECTOR
SECURITY
HARNESS
WIRE TIE
7 of 10