Honda 2000 RL Owner's Manual page 258

Main Menu Table of Contents
8. Reset the fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
9. Put the fastener in the hole in the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Remove the bulb by pushing it in
slightly and turning it counter-
clockwise.
Install the new bulb in the socket.
3. Reinstall the socket. Turn it
clockwise until it locks.
4. Test the lights to make sure the
new bulb is working.
Maintenance
Lights