Honda 2000 RL Owner's Manual page 235

Main Menu Table of Contents
Spark Plugs
IGNITION COIL CONNECTOR
LOCK TAB
4. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
Maintenance
BOLTS
IGNITION COIL
5. Use a wrench to remove the two
bolts holding the ignition coil.
Remove the ignition coil by pulling
it straight out.
6. Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
7. Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.