Horizon Fitness CST3.5 User Manual page 12

A S SE MB LY S T E P 4
HARDWARE BAG 4 CONTENTS :
YO U ' RE F I N I S HE D!
12
POWER SWITCH
CIRCUIT BREAKER
A Open HARDWARE BAG 4.
B Slide SUPPORT BARS into side
MOUNTING BRACKETS and line up
with top MOUNTING BRACKETS.
C Insert 2 BOLTS (G) into the tops
and 2 BOLTS (G) into the bottoms
of each SUPPORT BAR.
D Slide SUPPORT BAR BOOTS down
to cover BOLTS (G).
E Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'on' position, so that
the switch is lit. You will hear a
beep and the console will light up.